Analysis and modeling of burr formation during the plane milling of cast aluminium alloy using Polycrystalline Diamond Tools
Article dans une revue avec comité de lecture
Burr formation is a significant problem during manufacturing, and leads to a lack of geometrical quality through the appearance of undesired and undefined shapes on the workpiece. Thus, understanding the burr formation and elaborating of predictive models are helpful for process design in order to avoid or to reduce burrs and to optimize the strategies for eventual deburring. This study presents both an experimental approach and a model for the plane milling of openwork parts, where burrs are a significant factor. A large-scale analysis of relevant geometrical parameters and their interactions is performed. A phenomenological burr size model is established considering local parameters and the specificities of 3D cutting in milling. Based on local parameters, this article proposes a new methodology to simulate burr height along any part edge and for most face-milling trajectories. Simulations and validations during tool path exits, with changing local parameters, are presented. In addition to the quantitative approach, new 3D aspects of face milling in relation with Exit Order Sequence are developed.
Showing items related by title, author, creator and subject.
Investigations on exit burr formation mechanisms based on digital image correlation and numerical modelling Article dans une revue avec comité de lectureRÉGNIER, Tristan; MARCON, Bertrand; OUTEIRO, José; FROMENTIN, Guillaume; D’ACUNTO, Alain; CROLET, Arnaud (Taylor & Francis, 2019)Requirements on burr height and burr amount on machined parts are getting stricter. This leads to method development from manufacturing companies to predict burr distribution and its size along part edges. A deeper ...
Experimental Investigation and Modelling of Burr Formation during Orthogonal Cutting of A356+0.5Cu Aluminium Alloy Communication avec acteRÉGNIER, Tristan; FROMENTIN, Guillaume; OUTEIRO, José; MARCON, Bertrand; D'ACUNTO, Alain; CROLET, Arnaud (2016)Burr formation during parts manufacturing is a significant problem that companies try to minimise or eliminate. The present work aims to study the burr formation mechanisms in a cast aluminium alloy. Orthogonal cutting ...
Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy Article dans une revue avec comité de lectureRÉGNIER, Tristan; FROMENTIN, Guillaume; MARCON, Bertrand; OUTEIRO, José; D'ACUNTO, Alain; CROLET, Arnaud; GRUNDER, Timothée (Elsevier, 2018)Burr formation during machining is an important issue in industry. It causes an additional deburring operation, which is time consuming and has a negative economic impact. This study aims to analyse burr formation mechanisms ...
Etude de la formation des bavures en coupe orthogonale à l’outil carbure dans un alliage d’Aluminium – Silicium. Communication sans acteRÉGNIER, Tristan; FROMENTIN, Guillaume; OUTEIRO, José; MARCON, Bertrand; D'ACUNTO, Alain; CROLET, Arnaud (2016)Le but de cet article est d’étudier l’influence des paramètres de coupe sur la formation des bavures en coupe orthogonale. Pour ce faire, une étude en rabotage est réalisée avec des plaquettes carbures, sur un alliage ...
Phenomenological study of multivariable effects on exit burr criteria during orthogonal cutting of AlSi alloys using principal components analysis Article dans une revue avec comité de lectureRÉGNIER, Tristan; FROMENTIN, Guillaume; D'ACUNTO, Alain; OUTEIRO, José; MARCON, Bertrand; CROLET, Arnaud (American Society of Mechanical Engineers, 2018)During machining, burrs are produced along a part’s edges, which can affect a final product lifetime or its efficiency. Moreover, time-consuming and expensive techniques are needed to be applied to remove such burrs. ...