Beneficial effect of prestrain due to cold extrusion on the multiaxial fatigue strength of a 27MnCr5 steel
Article dans une revue avec comité de lecture
Date
2016Journal
International Journal of FatigueRésumé
Cold extrusion is a process commonly used to manufacture drive train components in the automotive industry. Large plastic strains can be applied during this operation (up to 1.5) and greatly changes the mechanical properties of the resulting material. This study focuses on the impact of cold extrusion process parameters on the multiaxial fatigue behaviour of steel components. A specific set of forward rod extrusion tools was developed to get original fatigue specimen able to characterise the effect of the manufacturing process on the fatigue behaviour. The specimens were extruded from two different initial diameters, giving two different reductions in cross-section of 18% and 75% respectively. To understand the influence of cold extrusion, the following analyses have been undertaken for each condition and on the initial material: monotonic tensile properties, microstructure, EBSD, residual stresses and hardness. Simulation of the forming process and microstructural observations show that the plastic strain is homogeneous in the specimen section. For both reduction factors, the forming process has a positive effect on the components properties: induced residual stresses in compression and improved hardness and roughness (Ra decreasing). Tension, plane bending and torsion fatigue tests show that the fatigue strength is about 30% higher for the batch with 75% reduced cross-section. All investigations show that strain hardening is the principal material parameter responsible for the increase in fatigue strength. A multiaxial fatigue criterion taking into account the effects of the forward rod extrusion process was also developed.
Fichier(s) constituant cette publication
- Nom:
- LAMPA_PMD_IJF_GERIN_2016
- Taille:
- 1.772Mo
- Format:
- Description:
- Article principal
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureLa déformation introduite dans le matériau par les procédés de forgeage à froid peut être considérée comme un type de pré-déformation, appliquée avant l’utilisation en fonctionnement du composant. Cette déformation modifie ...
-
Communication avec acteGERIN, Benjamin; VERDU, Catherine; MOREL, Franck; PESSARD, Etienne (Société Française de Métallurgie et de Matériaux, 2014)The present study focusses on analysing and modelling the influence on fatigue behaviour of the surface of a hot-forged C70 connecting rod which undergoes a shot-blasting treatment. The shot-blasting heavily affects the ...
-
Communication avec acteThe present study focuses on analysing and modelling the influence on fatigue behaviour of the surface of a hot-forged C70 connecting rod which undergoes a shot-blasting treatment. The shot-blasting heavily affects the ...
-
Article dans une revue avec comité de lectureThe present study focuses on analysing and modelling the influence on fatigue behaviour of the surface of a hot-forged C70 connecting rod which undergoes a shot-blasting treatment. The shot-blasting heavily affects the ...
-
Article dans une revue avec comité de lectureThis study focuses on the influence on fatigue behaviour of the surface integrity of a steel connecting rod. The component is hot-forged and shot-blasted, producing a complex surface state with large surface defects and ...