Creep age forming of Al-Cu-Li alloy: Application to thick sheet forming of double curvature aircraft panel
Conférence invitée
Author
![](/static/icons/feed.png)
206863 Laboratoire des Arts et Métiers ParisTech d'Angers - Procédés Matériaux Durabilité [LAMPA - PMD]
235335 Institut de Recherche Technologique Jules Verne [Bouguenais] [IRT Jules Verne]
![](/static/icons/feed.png)
206863 Laboratoire des Arts et Métiers ParisTech d'Angers - Procédés Matériaux Durabilité [LAMPA - PMD]
![](/static/icons/feed.png)
206863 Laboratoire des Arts et Métiers ParisTech d'Angers - Procédés Matériaux Durabilité [LAMPA - PMD]
Date
2016Abstract
Creep-age-forming of a thick Al-Cu-Li sheet is studied. An industrial stamping press is used to form a double curvature panel at a reduced scale. This forming, which includes several relaxation steps, is modelled using ABAQUS. A material model describing an elasto-viscoplastic behaviour with anisotropy effect has been identified and implemented in ABAQUS using Fortran subroutine. The numerical model is validated by comparing experiments and numerical results in terms of deformed shapes and an improved forming cycle is suggested.
Files in this item
- Name:
- LAMPA_NUMIFORM_2016_YOUNES.pdf
- Size:
- 926.0Kb
- Format:
- Description:
- Article principal
Related items
Showing items related by title, author, creator and subject.
-
Conférence invitéeYOUNES, Wael; GIRAUD, Eliane; MONTASSAR, Fredj; DAL SANTO, Philippe; VAN DER VEEN, Sjoerd (2016)Creep forming of Al-Mg-Li alloy sheets is studied. An instrumented bulging machine is used to form a double curvature panel at a reduced scale. The deformation of the work-sheet is ensured by a 7475 aluminum alloy lost ...
-
Article dans une revue avec comité de lectureCARDON, Amandine;
MAREAU, Charles;
AYED, Yessine; VAN DER VEEN, Sjoerd; GIRAUD, Eliane; DAL SANTO, Philippe (Elsevier BV, 2020-12-17)
The present work focuses on the simulation of the heat treatment applied after printing of Ti-6Al-4V parts. The numerical tool aims at predicting the influence of heat treatment conditions (e.g. holding time, temperature) ... -
Communication avec acteYOUNES, Wael; GIRAUD, Eliane; DAL SANTO, Philippe (Trans Tech Publications, 2015)Anisotropic behavior at high temperature of an Aluminum-Lithium alloy was studied. Mechanical tests at a temperature of 350°C and a strain rate of 10-2 s-1 were carried out on samples taken at different angles with respect ...
-
Article dans une revue avec comité de lectureDUMAS, Antoine; ECHARD, Benjamin; GAYTON, Nicolas; ROCHAT, Olivier; VAN DER VEEN, Sjoerd;
DANTAN, Jean-Yves (Elsevier, 2013)
Tolerance verification permits to check the product conformity and to verify assumptions made by the designer. For conformity assessment, the uncertainty associated with the values of the measurands must be known. In fact, ... -
Conférence invitéeEL GUEDER, Jawhar; GIRAUD, Eliane; ZHAO, Nan; DAL SANTO, Philippe (2016)Cold stretching of a thin 5154 aluminium sheet is studied. An instrumented bench is developed to analyse the forming of double curvature panels. A numerical tool using ABAQUS software is developed to predict the behaviour ...