An Experimental Assessment of Open-Phase Fault-Tolerant Virtual-Vector-Based Direct Torque Control in Five-Phase Induction Motor Drives
Article dans une revue avec comité de lecture
Direct torque control (DTC) has been recently used for the development of high-performance five-phase induction motor (IM) drives, where normal operation of the system has been usually considered and the ability of DTC to manage the situation has been analyzed in comparison with different rotor-field-oriented control (RFOC) strategies. The exploitation of fault-tolerant capabilities is also an interesting issue in multiphase machines, where the utility of RFOC controllers has been stated when the open-phase fault operation is considered. In this paper, the performance of DTC and RFOC controllers based on proportional resonant regulators and predictive control techniques is compared when an open-phase fault appears in a five-phase IM drive. Experimental tests are provided to compare the performance of the system using these control alternatives.
Files in this item
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lectureBERMUDEZ GUZMAN, Mario; GONZALEZ PRIETO, Ignacio; BARRERO, Federico; GUZMAN, Hugo; DURAN, Mario Javier; KESTELYN, Xavier (Institute of Electrical and Electronics Engineers, 2017)Direct torque control (DTC) has been widely used as an alternative to traditional field-oriented control (FOC) methods for three-phase drives. The conventional DTC scheme has been successfully extended to multiphase drives ...
Comparative Study of DTC and RFOC Methods for the Open-Phase Fault Operation of a 5-Phase Induction Motor Drive Communication avec acteBERMUDEZ GUZMAN, Mario; GUZMAN, Hugo; GONZALEZ PRIETO, Ignacio; BARRERO, Federico; DURAN, Mario Javier; KESTELYN, Xavier (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015)Direct Torque Control (DTC) technique has been applied in recent times in high performance five-phase induction motor drives during the normal operation of the system. The use of DTC in the multiphase area is far from ...
Communication avec acteBERMUDEZ GUZMAN, Mario; GONZALEZ PRIETO, Ignacio; BARRERO, Federico; DURAN, Mario Javier; KESTELYN, Xavier (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 2015)Direct torque control (DTC) is extensively used in conventional three-phase drives as an alternative to field-oriented control methods. The standard DTC technique was originally designed to regulate two independent variables ...
Article dans une revue avec comité de lectureMARTIN, Cristina; BERMUDEZ GUZMAN, Mario; BARRERO, Federico; ARAHAL, Manuel R.; DURAN, Mario Javier; KESTELYN, Xavier (Elsevier, 2017)Model predictive control techniques have been recently proposed as a viable control alternative for power converters and electrical drives. The good current tracking, flexible control design or reduced switching losses are ...
Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines Article dans une revue avec comité de lectureBERMUDEZ GUZMAN, Mario; GOMOZOV, Oleg; BARRERO, Federico; NGUYEN, Ngac Ky; SEMAIL, Eric; KESTELYN, Xavier (Elsevier, 2019)Multiphase machines have recently gained interest in the research community for their use in applications where high power density, wide speed range and fault-tolerant capabilities are required. The optimal control of such ...