(TaC/Ta2C) bilayer formed on carburized and annealed tantalum; development of a numerical growth model
Article dans une revue avec comité de lecture
Author
CARETTE, LaurentJACQUET, PhilippeCOTTON, DominiqueVIGNAL, VincentFAURE, SébastienAbstract
This paper describes a model developed to simulate the evolution of carbide layers (TaC/Ta2C) formed during carburizing and annealing treatments of tantalum. The model is based on a parabolic evolution of the layer thickness during the growth, and on the carbon conservation during the annealing. In order to validate this model a MATLAB® program was developed. It enables the prediction of the evolution of the tantalum carbide layers (nature and thickness) for a desired treatment defined by a temperature, a carburizing and an annealing duration.
Files in this item
Collections
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture(Elsevier, 2017)The carburizing of tantalum samples under different carbon flow rates has highlighted the influence of the carbon flow rate on the structure of tantalum carbides. XRD analyses enabled the identification of surface structures ...
-
Article dans une revue avec comité de lecture
COTTON, Dominique; ; ; (Elsevier, 2022)
Low pressure carburizing cycles were carried out on tantalum samples. A Ta2C precipitates layer is present under the TaC and Ta2C surface layers. As the TaC and Ta2C layers, the Ta2C precipitates layer (TPL) grows by ... -
Article dans une revue avec comité de lecture; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;RICHAUD, Emmanuel (Elsevier, 2021)
The need for personal protective equipment increased exponentially in response to the Covid-19 pandemic. To cope with the mask shortage during springtime 2020, a French consortium was created to find ways to reuse medical ...
-
Article dans une revue avec comité de lecture; ; ;FROMENTIN, Guillaume; ; (Elsevier, 2015)
Strain distributions in the machined surface and subsurface of OFHC copper workpieces were determined experimentally and through numerical simulations. An experimental setup, comprising a double frame camera and a pulsed ...
-
Article dans une revue avec comité de lecture;COTTON, Dominique; ; ; ; ; ; ; (Elsevier BV, 2023-09-15)
As a first step to devise a hybrid process for the production of TiC wear coatings on 316L, consisting of magnetron sputtering followed by titanium carburization, interfacial reactivity between stainless steel and titanium ...