Ta2C precipitation after low pressure carburizing of tantalum
Article dans une revue avec comité de lecture
Low pressure carburizing cycles were carried out on tantalum samples. A Ta2C precipitates layer is present under the TaC and Ta2C surface layers. As the TaC and Ta2C layers, the Ta2C precipitates layer (TPL) grows by carbon diffusion in tantalum matrix. Specific zones with low precipitates content were observed at the bulk surface and in the tantalum grain boundaries. Other zones with lower precipitates content are also present in carburized and annealed samples. All the zones with low precipitates content are induced by the Ta2C precipitation mechanism described by Dahmen et al. [1,2]. Indeed, Ta2C needs vacancies to precipitate. If vacancy sinks are present at the bulk surface, at a grain boundary or in a dislocation, then Ta2C precipitation is highly reduced. Another effect of the annealing treatment is an increase of the Ta2C precipitates layers growth rate.
Showing items related by title, author, creator and subject.
(TaC/Ta2C) bilayer formed on carburized and annealed tantalum; development of a numerical growth model Article dans une revue avec comité de lectureCARETTE, Laurent; JACQUET, Philippe; COTTON, Dominique; VIGNAL, Vincent; FAURE, Sébastien (Elsevier, 2019)This paper describes a model developed to simulate the evolution of carbide layers (TaC/Ta2C) formed during carburizing and annealing treatments of tantalum. The model is based on a parabolic evolution of the layer thickness ...
Article dans une revue avec comité de lectureCOTTON, Dominique; JACQUET, Philippe; FAURE, Sébastien; VIGNAL, Vincent (Elsevier, 2017)The carburizing of tantalum samples under different carbon flow rates has highlighted the influence of the carbon flow rate on the structure of tantalum carbides. XRD analyses enabled the identification of surface structures ...
Comparison of thermal diffusion and interfacial reactions for bulk and sputtered titanium on 316L stainless steel Article dans une revue avec comité de lectureAUGER, Jean-Marc; COTTON, Dominique; NOUVEAU, Corinne; BESNARD, Aurélien; BERNARD, Frédéric; ARDIGO-BESNARD, Maria-Rosa; MONCHOUX, Jean-Philippe; COURS, R.; MARCELOT, Cécile (Elsevier BV, 2023-09-15)As a first step to devise a hybrid process for the production of TiC wear coatings on 316L, consisting of magnetron sputtering followed by titanium carburization, interfacial reactivity between stainless steel and titanium ...
Experimental and numerical assessment of subsurface plastic deformation induced by OFHC copper machining Article dans une revue avec comité de lectureOUTEIRO, José; CAMPOCASSO, Sébastien; DENGUIR, Lamice; FROMENTIN, Guillaume; VIGNAL, Vincent; POULACHON, Gérard (Elsevier, 2015)Strain distributions in the machined surface and subsurface of OFHC copper workpieces were determined experimentally and through numerical simulations. An experimental setup, comprising a double frame camera and a pulsed ...
Article dans une revue avec comité de lectureVAN DEN ABBEELE, Maxim; LI, Fan; POMERO, Vincent; BONNEAU, Dominique; SANDOZ, Baptiste; LAPORTE, Sébastien; SKALLI, Wafa (Elsevier, 2018)Background: The aim of the present study is to propose a subject-specific biomechanical control model for the estimation of active cervical spine muscle forces. Methods: The proprioception-based regulation model developed ...