Numerical investigations on a yarn structure at the microscale towards scale transition
Article dans une revue avec comité de lecture
Since the beginning of the last decade, few examples of multifilament models for dry fabrics have been presented in literature. This work deals with the simulation of a single yarn subjected to transverse impact. Inspired by the models previously developed by other authors, a revisited form of Discrete Element Method has been adopted to perform microscopic analyses in a more efficient computational environment. Transverse impact analysis onto a single KEVLAR KM2 yarn has been performed using this approach. Truss elements have been adopted to discretize yarn filaments instead of heavy computational 3D finite elements. A good agreement with literature results has been achieved with an important reduction of computational resource. In the end, a proposed scale transition is discussed.
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Modelling the wear evolution of a single alumina abrasive grain: Analyzing the influence of crystalline structure Article dans une revue avec comité de lectureGODINO, L.; POMBO, I.; GIRARDOT, Jérémie; SANCHEZ, J.A.; IORDANOFF, Ivan (Elsevier, 2020)The grinding process is continuously adapting to industrial requirements. New advanced materials have been developed, which have been ground. In this regard, new abrasive grains have emerged to respond to the demands of ...
A 3D DEM simulation to study the influence of material and process parameters on spreading of metallic powder in additive manufacturing Article dans une revue avec comité de lectureMARCHAIS, Kevin; GIRARDOT, Jérémie; METTON, Charlotte; IORDANOFF, Ivan (Springer Verlag, 2021)The aim of this work is to understand the granular behavior of metal powder during the spreading phase of the LBM process in order to study the effect of powder properties and process parameters on the quality of the layer ...
A promising way to model damage in composite and dry fabrics using a Discrete Element Method (DEM) Communication sans acteDAU, Frédéric; MAHEO, Laurent; LE, Ba Danh; GIRARDOT, Jérémie (ASTM, 2014)A promising way to model fracture mechanics with the use of an original Discrete Element Method (DEM) is proposed. After proving the ability of the method to capture kinetic damage induced by cracking phenomena in brittle ...
Article dans une revue avec comité de lectureDAU, Frédéric; DANO, M.-L.; VÉRONE, B.; GIRARDOT, Jérémie; ABOURA, Z.; MORVAN, J.-M. (Elsevier BV, 2021)The present work focuses on the characterization of the in-plane and out-of-plane behavior of a three-dimensional angle-interlock woven composite. In-plane tensile and compression tests, short beam shear tests and ...
Article dans une revue avec comité de lectureGIRARDOT, Jérémie; DAU, Frédéric (EDP Sciences, 2016)Dry fabrics can be investigated in aeronautic field to contain debris. Such structures are most of the time modeled with finite elements leading to heavy time calculations especially due to contact treatment. An alternative ...