Simulation of Grain Refinement Induced by High-Speed Machining of OFHC Copper Using Cellular Automata Method
Article dans une revue avec comité de lecture
Date
2020Journal
Journal of Manufacturing Science and EngineeringAbstract
During high-speed machining (HSM), the microstructure of materials evolves with significant plastic deformation process under high strain rate and high temperature, which affects chip formation and material fracture mechanisms, as well as surface integrity. The development of models and simulation methods for grain refinement in machining process is of great importance. There are few models which are developed to predict the evolution of the grain refinement of HSM in mesoscale with sufficient accuracy. In this work, a cellular automata (CA) method with discontinuous (dDRX) and continuous (cDRX) dynamic recrystallization (DRX) mechanisms is applied to simulate the grain refinement and to predict the microstructure morphology during machining oxygen-free high-conductivity (OFHC) copper. The process of grain evolution is simulated with the initial conditions of strain, strain rate, and temperature obtained by finite element (FE) simulation. The evolution of dislocation density, grain deformation, grain refinement, and growth are also simulated. Moreover, cutting tests under high cutting speeds (from 750 m/min to 3000 m/min) are carried out and the microstructure of chips is observed by electron backscatter diffraction (EBSD). The results show a grain refinement during HSM, which could be due to the occurrence of DDR and cDRX. High temperature will promote grain recovery and growth, while high strain rate will significantly cause a high density of dislocations and grain refinement. Therefore, HSM contributes to the fine equiaxed grain structure in deformed chips and the grain morphology after HSM can be simulated successfully by the CA model developed in this work.
Files in this item
- Name:
- LABOMAP_JMSE_2020_XU.pdf
- Size:
- 2.206Mb
- Format:
- Description:
- Simulation of Grain Refinement ...
- Embargoed until:
- 2021-03-01
Collections
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureXU, Xiang; ZHANG, Jun; OUTEIRO, José; XU, Binbin; ZHAO, Wanhua (Elsevier, 2020)During high speed machining (HSM), the strong thermal-mechanical coupling can lead to the microstructure evolution in the deformation zone of workpiece. Grain refinement may occur, which has great effects on the mechanical ...
-
Article dans une revue avec comité de lectureXU, Xiang; MARTINS DO OUTEIRO, Jose Carlos; ZHANG, Jun; XU, Binbin; ZHAO, Wanhua; ASTAKHOV, Viktor (Elsevier, 2021)The accuracy of a machining model depends on the capability of this model to describe the physical phenomena associated to the real machining system. This includes the material constitutive model and the approach used to ...
-
Conférence invitéeZHANG, Hao; ZHAO, Benteng; GONG, Jinlin; XU, Yanliang; VU, Duc Tan; NGUYEN, Ngac Ky; SEMAIL, Eric; DOS SANTOS MORAES, Tiago José (IEEE, 2019)Compared to sinusoidal machines, a bi-harmonic machine (with only two harmonics of similar value in the electromotive force spectrum) can develop torque of comparable values under three kinds of supply: with only first or ...
-
Article dans une revue avec comité de lectureWith the dramatic development of location-based services, a large amount of vehicle trajectory data are available and applied to different areas,while there are still many research challenges left, one of thembeing data ...
-
Article dans une revue avec comité de lectureZHANG, Xiao-Ming; ZHANG, Ke; ZHANG, Dong; OUTEIRO, José; DING, Han (American Society of Mechanical Engineers, 2019)A great challenge of metal cutting modeling is the ability of the material constitutive model to describe the mechanical behavior of the work material under the deformation conditions that characterizes this process. In ...