A damaging beam-lattice model for quasi-brittle fracture
Article dans une revue avec comité de lecture
This work aims to propose a new damaging beam-lattice model using the Discrete Element Method paradigm dedicated to the simulation of quasi-brittle fracture under complex loadings. Enrichment of the elastic Euler–Bernoulli beam link, inspired by the cohesive zone models, is proposed to provide a damageable behavior in mixed mode and contribution of frictional behavior is not considered in this first version of the damage model. The tensile contribution on the beam link is taken into account from the first order elongation of the beam while all other contributions, i.e. bending, shear, and torsion are considered from the second-order elongation of the beam. These orders of elongation refer to beam theory, where the first elongation is induced by a force normal to the cross-section and the second is the elongation of the curvilinear length of the beam resulting from shear, bending and torsion loads. As these two kinematics do not correspond to the conventional modes I, II, and III, a deep checking step of the model is undertaken. First, mixed-mode testing on a single beam is performed to monitor the energy components dissipated in each mode and to ensure that energy dissipated in mixed mode exhibits a monotonic evolution between boundary values related to pure modes. Based on this first verification, a tensile test and a compression one are simulated on a cylinder specimen to evaluate the model capabilities to qualitatively describe the well-known characteristics of quasi-brittle fracture such as failure facies, unilateral effect, and the ratio between the compression and tensile strength. Finally, the model is used to simulate a complex crack propagation test coming from the recent international Carpiuc benchmark.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Article dans une revue avec comité de lectureKOPP, Jean-Benoit; GIRARDOT, Jérémie (Scientific Research Publishing, Inc., 2021)The influence of temperature on the resistance to rapid crack propagation of a semi-crystalline bio-based polymer was studied. The experimental results described in this study allow to initiate a first discussion ...
Article dans une revue avec comité de lectureMAZEL, Vincent; GUERARD, Sandra; CROQUELOIS, Benjamin; KOPP, Jean-Benoit; GIRARDOT, Jérémie; DIARRA, Harona; BUSIGNIES, Virginie; TCHORELOFF, Pierre (Elsevier, 2016)Mechanical strength is an important critical quality attribute for tablets. It is classically measured, in the pharmaceutical field, using the diametral compression test. Nevertheless, due to small contact area between the ...
Study of the dynamic fracture of hollow spheres under compression using the Discrete Element Method Article dans une revue avec comité de lectureCORE, Arthur; KOPP, Jean-Benoit; GIRARDOT, Jérémie; VIOT, Philippe (ESIS - Elsevier, 2018)Hollow sphere structure (HSS) belongs to cellular solids that have been studied recently for its multiples properties. In our case, HSS aims to absorb soft impacts energy on an airliner cockpit. This structure is investigated ...
Article dans une revue avec comité de lectureKOPP, Jean-Benoit; GIRARDOT, Jérémie (Springer Verlag, 2020)The fracture behaviour of a semi-crystalline bio-based polymer was studied. Dynamic fracture tests on strip band specimens were carried out. Fracture surfaces were observed at different scales by optical and electron ...
Article dans une revue avec comité de lectureLE BARBENCHON, Louise; GIRARDOT, Jérémie; KOPP, Jean-Benoit; VIOT, Philippe (Elsevier, 2019)This study focuses on the microstructural aspects of a cork-based by-product known as agglomerated cork and its influence on the compressive mechanical behaviour. The material consists in granulates of a natural polymeric ...