Tension, compression, and shear behavior of advanced sheet molding compound (A-SMC): Multi-scale damage analysis and strain rate effect
Article dans une revue avec comité de lecture
Advanced sheet molding compounds (A-SMC) are a new generation of alternative materials to steels for applying in automotive structures. It contains a thermoset matrix involving mineral charge (CaCO3) reinforced with a high fraction of discontinuous bundles of glass fibers (around 50% in mass) compared to the other types of SMC composites. The crashworthiness evaluation and multi-scale mechanical characterizations of this automotive material is essential. In this study, at first, the microstructure of A-SMC composite was investigated by Scanning Electron Microscopy (SEM), ultrasonic analysis, and X-ray micro-tomography. Two configurations’ plates of Randomly Oriented (RO) and Highly Oriented (HO) were analyzed under quasi-static tension, compression, and shear loadings. To study the effect of fiber orientation, for HO plate, two fiber directions were chosen: HO 0◦ (parallel to the Mold Flow Direction (MFD)) and HO-90◦ (perpendicular to the MFD). Strain rate effect (from 0.25 s−1 to 10 s−1) on shear properties and visco-damage behavior of A-SMC composite has been studied. For this purpose, a new setup for shear testing was designed after optimization via ABAQUS FE code to achieve constant strain rate. HO-0◦ samples represented higher strength in tension and compression loadings, unlike shear loading compared to RO and HO-90◦ samples. A multi-scale damage study confirmed that predominant damage mech anism is decohesion at fiber/matrix interface under tension, compression, and shear loadings.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; MONTAZERI, A.; NOURI SEDEH, M.; ABBASNEZHAD, Navideh; FITOUSSI, Joseph; TCHARKHTCHI, Abbas (Springer Verlag, 2021)Nowadays, polyamide 12 (PA-12) is considered as an interesting polymer in the rotomolding process to manufacture different pieces like the liner part in the storage hydrogen tank (type IV). In this study, the pure polyamide-12 ...
Mechanical characterization of a Low Density Sheet Molding Compound (LD-SMC): Multi-scale damage analysis and strain rate effect Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; FITOUSSI, Joseph; ABBASNEZHAD, Navideh; MERAGHNI, Fodil; SUROWIEC, Benjamin; TCHARKHTCHI, Abbas (Elsevier, 2017)This paper presents the results of an overall experimental characterization of the mechanical behavior of a Low Density Sheet Molding Compound (LD-SMC). LD-SMC is a polyester matrix containing mineral charge (CaCO3) ...
Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK) Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; KHAVANDI, Alireza; FITOUSSI, Joseph; ARABI, Hossein; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas (Elsevier, 2018)Testing methods have been developed to compare the mechanical responses and failure behavior of polyether-ether-keton (PEEK) thermoplastic polymer; under quasi-static, high strain rate tensile tests and fatigue loading. ...
Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; ZIRAK, Nader; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas; BAKIR, Farid (Elsevier, 2021)Physical and mechanical properties of the drug-incorporated polymer play a significant role in the release behavior from the drug carriers. Understanding the relative extent of variation in the physical and mechanical ...
In vitro study of drug release from various loaded polyurethane samples and subjected to different non-pulsed flow rates Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; SHIRINBAYAN, Mohammadali; TCHARKHTCHI, Abbas; BAKIR, Farid (Elsevier, 2020)Drug-eluting implants with a polymeric matrix are currently widely used and the interest of modeling their behavior is increasing. This article aims to present preliminary results of an in vitro under steady flow, study ...