Sensitivity Analysis for Simulated Annealing-Based Fitting of CAD Models to Point Clouds of Digitized Parts
Chapitre d'ouvrage
Auteur
Résumé
AbstractThis paper addresses the way a simulated annealing-based fitting strategy can be enhanced by leveraging a sensitivity analysis able to characterize the impact of the variations in the parameters of a CAD model on the evolution of the deviation between the CAD model itself and the point cloud of the digitized part to be fitted. The principles underpinning the adopted fitting algorithm are briefly recalled. The applied sensitivity analysis is described together with the comparison of the resulting sensitivity evolution curves with the changes in the CAD model parameters imposed by the simulated annealing algorithm. This analysis suggests several possible improvements that are discussed. The overall approach is illustrated on the fitting of single mechanical parts but it can be directly extended to the fitting of parts’ assemblies. It is particularly interesting in the context of the Industry 4.0 to update digital twins of physical products and systems.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureSHAH GHAZANFAR, Ali; POLETTE, Arnaud; PERNOT, Jean-Philippe; GIANNINI, Franca; MONTI, Marina (SPRINGER, 2022-03-17)Due to its capacity to evolve in a large solution space, the Simulated Annealing (SA) algorithm has shown very promising results for the Reverse Engineering of editable CAD geometries including parametric 2D sketches, ...
-
Article dans une revue avec comité de lectureSHAH GHAZANFAR, Ali; GIANNINI, Franca; MONTI, Marina; PERNOT, Jean-Philippe; POLETTE, Arnaud (ASME, 2021-12-16)This paper introduces a novel reverse engineering (RE) technique for the reconstruction of editable computer-aided design (CAD) models of mechanical parts’ assemblies. The input is a point cloud of a mechanical parts’ ...
-
Article dans une revue avec comité de lectureSHAH GHAZANFAR, Ali; GIANNINI, Franca; MONTI, Marina; PERNOT, Jean-Philippe; POLETTE, Arnaud (Springer Science and Business Media LLC, 2020-02-18)This paper introduces a new ftting approach to allow an efcient part-by-part reconstruction or update of editable CAD models fitting the point cloud of a digitized mechanical parts′ assembly. The idea is to make use ...
-
Article dans une revue avec comité de lectureMONTLAHUC, Jérémy; SHAH GHAZANFAR, Ali; PERNOT, Jean-Philippe; POLETTE, Arnaud (CAD Solutions LLC (imprimé) and Taylor & Francis Online (en ligne), 2019)This paper introduces a new approach for the generation of as-scanned point clouds of CAD assembly models. The resulting point clouds incorporate various realistic artifacts that would appear if the corresponding real ...
-
Article dans une revue avec comité de lectureGIANNINI, Franca; MONTI, Marina; PELLETIER, Jérôme; PERNOT, Jean-Philippe (CAD Solutions LLC (imprimé) and Taylor & Francis Online (en ligne), 2013)World-wide market competition and the need to create products that better satisfy the market expectations require a more comprehensive involvement of the customer in the product definition loop. Therefore, it is crucial ...