Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge’s peeling tools’ wear resistance
TypeArticles dans des revues avec comité de lecture
The aim of this study is first to define the effect of a surface finishing such as sand-blasting on the geometry of a wood cutting tool and its wear resistance. In addition, the effectiveness of surface coatings like CrAlN deposited by physical vapor deposition (PVD) technique on conventional and sand-blasted cutting edges was studied. A reference tool and different sand-blasted ones were tested by micro-peeling of beech in a laboratory. Microscopic observations, cutting forces measurement and cutting wear tests were carried out to quantify the behavior of these tools. The results obtained showed that the artificial wear by sandblasting leads to an increase in the wear resistance and coating effectiveness, and completely changes the type of damage done to the tools. The sand-blasting application combined or not with CrAlN coating showed an improvement in the wear resistance of the tools and a modification of the forces during the peeling process. The effectiveness of the CrAlN layers was improved thanks to the sand-blasting treatment and then the duplex ones performed better.
Showing items related by title, author, creator and subject.
NOUVEAU, Corinne; LABIDI, Chafik; FERREIRA-MARTIN, Jean-Pierre; COLLET, Robert; DJOUADI, Mohamed Abdou (Elsevier, 2007)This study deals with the development of Chromium Aluminium Nitride (CrAlN) hard coatings (by varying the nitrogen content in the plasma, the target bias voltage, the working pressure and the deposition time) and their ...
Etude de la stabilité thermique et de l’influence de l’épaisseur sur les contraintes de couches de Cr et CrN obtenues par pulvérisation cathodique, NOUVEAU, Corinne; BENLATRECHE, Yacine; CHEKOUR, Lounis; LABIDI, Chafik (Société de Chimie Industrielle, 2006)Cette étude porte sur des dépôts de couches minces dures de chrome et de nitrures de chrome élaborées par PVD et leur caractérisation. Des films de chrome ont été préparés par pulvérisation cathodique RF. L’influence de ...
LABIDI, Chafik; DENAUD, Louis; NOUVEAU, Corinne; COLLET, Robert; HENRY, Laurent (Presses Polytechniques et Universitaires Romandes, 2007)One of the major problems concerning tools of wood industry is nicks occurrence on the cutting edge. This phenomenon is accentuated by the small tool angle of most of the wood machining tools. The aim of this present study ...
Effect of duplex treatments by plasma nitriding and triode sputtering on corrosion behaviour of 32CDV13 low alloy steel CHALA, Abdelouahad; NOUVEAU, Corinne; DJOUADI, Mohamed Abdou; STEYER, Philippe; MILLET, Jean-Pierre; SAIED, Chahinez; AIDA, Mohammed Salah; LAMBERTIN, Michel (Elsevier, 2006)This paper presents corrosion behaviour of duplex treated low alloy steel. Different kinds of samples were tested: non-treated, plasma nitrided, ZrBN-triode sputtered and ZrBN-duplex treated samples. The corrosion behaviour ...
SAIED, Chahinez; CHALA, Abdelouahad; NOUVEAU, Corinne; DJOUADI, Mohamed Abdou; CHEKOUR, Lounis (WILEY, 2007)The excellent mechanical properties of chrome-vanadium low alloy steel usually obviate the need for expensive quench and tempering operations. Furthermore, the presence of a significant amount of nitride phases has generated ...