Proposal for a smart pressurised ring test to study thick composite produced by ﬁlament winding
TypeArticles dans des revues avec comité de lecture
Improvements in the characterisation of materials used in pipes, tubes or vessels rely on the development of tests on cylindrical samples in order to be consistent with the real manufacturing process. Existing devices are unable to reach the pressure limits required to test high pressure hydrogen storage tanks. We therefore propose an original test device based on a conical ﬁtting system. First, the operational principle and the pressure measurement technique are presented. Next, the choice of apparatus design parameters according to test requirements is discussed. In addition, the device’s capabilities are illustrated on a 39 mm thick CFRP ring test including Digital Image Correlation measurements.
Showing items related by title, author, creator and subject.
DEMARCHE DE CONCEPTION D’UN ESSAI DE CARACTERISATION MECANIQUE MULTI-INSTRUMENTE : CAS D'UN TEST DE MISE SOUS PRESSION D’ANNEAU COMPOSITE PILATO, Aurélie; PERRY, Nicolas; BOIS, Christophe; WAHL, Jean-Christophe (2012)le stockage de l'hydrogène sous forme gazeuse nécessite de développer les modèles de comportement des réservoirs composites (carbone époxy) réalisés en utilisant le procédé d'enroulement filamentaire. Ces réservoirs ...
PERRY, Nicolas; WAHL, Jean-Christophe; BOIS, Christophe; PILATO, Aurélie; BERNARD, Alain (Elsevier, 2013)Hydrogen stock vessels add new product specifications because of higher pressure use. Today static application leads up to 700 bars. But pressure devices must resist, because of certification, at 3 times pressure (2100 ...
Development of a micromechanical model in interaction with parameters related to the microstructure of carbon/epoxy composites. EL MOUSSAID, Mohammed; WAHL, Jean-Christophe; PERRY, Nicolas; BOIS, Christophe (2014)Gaseous Hydrogen storage under high pressure for autonomous energy application leads to non-metallic solutions for the material of vessels. The choice of wound carbon / epoxy composites was adopted for the design of storage ...
LAEUFFER, Hortense; ARBAOUI, Jamal; BOIS, Christophe; LAVELLE, Florian; PERRY, Nicolas; WAHL, Jean-Christophe (Elsiever, 2017)This paper presents an experimental setup for the measurement of permeability evolution induced by mechanical loading. The experiment consists in ressurizing a pipe-specimen. Internal pressure is used for both loading and ...
A model for the prediction of transverse crack and delamination density based on a strength and fracture mechanics probabilistic approach LAEUFFER, Hortense; GUIOT, Brice; WAHL, Jean-Christophe; PERRY, Nicolas; LAVELLE, Florian; BOIS, Christophe (2016)The aim of this study is to provide a relevant description of damage growth and the resultant network for leakage prediction in liner-less composite vessels. A damage meso-model built on strength and energy criteria as ...