Fretting wear performances of multilayered PVD TiAlZrN/TiAlN/TiAl on AISI 4140 steel
Article dans une revue avec comité de lecture
JournalInternational Review of Mechanical Engineering
Nowadays, most surface treatments are realized through vapor deposition techniques as thin hard coatings to guarantee; high surface hardness, low friction coefficient and improve wear resistance. Several experimental investigations have let to the development of a (TiAlCN/TiAlN/TiAl) and (TiAlZrN/TiAlN/TiAl) coatings in preference to the traditional TiN coating. In the current paper research conducted on fretting wear of a (TiAlCN/TiAlN/TiAl) and a (TiAlZrN/TiAlN/TiAl) multilayer coatings deposited by reactive DC (magnetron sputtering) of Ti-Al and Ti-Al-Zr alloys on AISI4140 steel. Fretting wear tests (20.000 cycles at 5 Hz) were conducted in ambient conditions, where the interaction between normal load and displacement amplitude determines the fretting regime. The influence of the normal load and displacement amplitude on the coefficients of instantaneous coefficient of friction and stabilized coefficient of friction is different from the two multilayer coated steels. The PVD coating (TiAlZrN/TiAlN/TiAl) reduces the friction. The worn volume of coated AISI4140 steel is sensitive to normal load and displacement amplitude. The relation between worn volume and cumulative dissipated energy was established for the two coated steels. The energetic fretting wear coefficients were also determined. A multilayer (TiAlZrN/TiAlN/TiAl) coating has a low energetic wear coefficient.
Files in this item
- Embargoed until:
Showing items related by title, author, creator and subject.
Correlation between thermal properties and aluminum fractions in CrAlN layers deposited by PVD technique Article dans une revue avec comité de lectureTLILI, Brahim; MUSTAPHA, Nasri; NOUVEAU, Corinne; BENLATRECHE, Yacine; GUILLEMOT, Gildas; LAMBERTIN, Michel (Elsevier, 2010)The CrAlN coatings are a good alternative to conventional CrN coatings especially for high temperature oxidation-resistance applications. Different CrAlN coatings were deposited on silicon (100) by PVD (Physical vapor ...
Communication avec acteTLILI, Brahim; NOUVEAU, Corinne; BENLATRECHE, Yacine; MUSTAPHA, Nasri; LAMBERTIN, Michel (2009)In the present investigation, novel Cr/CrN, CrN/CrAlN and Cr/CrN/CrAlN multilayered coatings thin films have been developed by dual RF magnetron sputtering. They consist of superposing Cr, CrN and CrAlN layers of 50–500nm ...
Article dans une revue avec comité de lectureTLILI, Brahim; NOUVEAU, Corinne; WALOCK, Michael J.; NASRI, Mustapha; GHRIB, Taher (Elsevier, 2012)Cr/CrN/CrAlN, CrN/CrAlN and Cr/CrN thin layers were deposited by PVD (Physical Vapor Deposition). The multilayers were obtained from the combined deposition of different layers Cr, CrN and CrAlN thick films on on AISI4140 ...
Tribological and electrochemical performances of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by RF magnetron sputtering Article dans une revue avec comité de lectureBELIARDOUH, Nasser Eddine; BOUZID, Kheireddine; NOUVEAU, Corinne; TLILI, Brahim; WALOCK, Michael J. (Elsevier, 2015)CrN/CrAlN and Cr/CrN/CrAlN multilayers were grown with dual RF magnetron sputtering. The application of these multilayers will be wood machining of green wood. That is why ball-on-disc and electrochemical tests in NaCl ...
Article dans une revue avec comité de lectureAOUADI, Khalil; NOUVEAU, Corinne; BESNARD, Aurélien; TLILI, Brahim; MONTAGNE, Alex; CHAFRA, Moez (Springer, 2021)CrAlN films were synthesized by DC reactive magnetron sputtering. The influence of the aluminium content on the microstructure, hardness and the friction coefficient of the CrAlN films have been investigated. Results ...