The effect of quenching and defects size on the HCF behaviour of Boron steel
Article dans une revue avec comité de lecture
Date
2014Journal
International Journal of FatigueRésumé
This work investigates the effect of natural and artificial surface defects and quenching on the fatigue strength of a Boron steel (22MnB5). A vast experimental campaign has been undertaken to study the high cycle fatigue behaviour and more specifically the fatigue damage mechanisms observed in quenched and untreated materials, under different loading conditions and with differents artificial defects sizes (from 25 μm to 370 μm radius). In order to test the sheet metal in shear an original test apparatus is used. The critical defect size is determined to be 100 ± 50 μm. This critical size does not appear to depend on the loading type or the microstructure of the material (i.e. ferritic–perlitic or martensitic). However, for large defects, the quenched material is more sensitive to the defect size than the untreated material. For a defect size range of 100–300 μm the slope of the Kitagawa–Takahashi diagram is approximately −1/3 and −1/6 for the quenched and untreated materials respectively. A probabilistic approach that leads naturally to a probabilistic Kitagawa type diagram is developed. This methodology can be used to explain the relationship between the influence of the heat treatment and the defect size on the fatigue behaviour of this steel.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteABRIVARD, Benjamin; DELHAYE, Philippe; GERIN, Benjamin; MOREL, Franck; PESSARD, Etienne (V. Aubin, S. Courtin, A. Koster, 2013)This work deals with the effect of heat treatment on the fatigue strength of a rear axial beam and aims to propose a methodology suitable and reliable for fatigue design. The rear axial beam is made of sheet metal (22MnB5); ...
-
Communication avec acteThis study is dedicated to the effect of the heat treatment on the fatigue strength of an automobile rear axle beam and aims to propose a suitable and reliable methodology for the fatigue design. The rear axle beam is made ...
-
Communication avec acteABROUG, Foued; CHOVE, Etienne; MOREL, Franck; PESSARD, Etienne; GERMAIN, Guénaël (Elsevier BV - Procedia Engineering, 2018)The aim of this study is to identify the impact of High Speed Machining defects on the fatigue behaviour of the Al7050 aluminium alloy. A vast experimental campaign under fully reversed plane bending loads containing ...
-
Conférence invitéeLors du fraisage UGV de pièces aéronautiques, certains défauts géométriques, tels que les ressauts et les marques de vibration, peuvent être générés. Pour obtenir une surface de bonne qualité, une opération de rectification ...
-
Conférence invitéeDuring the High Speed Machining (HSM) of aircraft components, geometrical defects, such as mismatches or chatters, can be created. To obtain a high surface quality, an expensive manual grinding operation is systematically ...