Computerized Simulation of Interference in Thread Milling of Non-Symmetric Thread Profiles
Communication avec acte
Résumé
Thread milling is a machining technique which is becoming widely used in specific contexts such as large diameter threading. Furthermore, compared to tapping, it is fully adapted to produce internal threads in difficult-to-cut materials, because the tool can be easily removed if a breakage occurs. For thread milling, as well as for form milling, groove and worm machining, geometrical considerations are critical aspects to succeed surface machining with the required accuracy. Interference phenomena may appear and appropriate cutter profiles and tool trajectories have to be defined to generate the desired shape. The proposed study is focusing on the threading of non-symmetric profile. A geometrical model computing the envelope profiles and using full parametrical definitions of the tool and thread is proposed. Its exploitation allows an analysis to explain and to quantify the influencing parameters on overcut. Then, an iterative method based on a direct approach, is proposed to define the tool design allowing to machine non-symmetric threads with good accuracy.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Lithographically Defined Cross-Linkable Top Coats for Nanomanufacturing with High-χ Block Copolymers Article dans une revue avec comité de lectureCHEVALIER, Xavier; GOMES CORREIA, Cindy; POUND-LANA, Gwenaelle; BÉZARD, Philippe; SÉRÉGÉ, Matthieu; PETIT-ETIENNE, Camille; GAY, Guillaume; CUNGE, Gilles; CABANNES-BOUÉ, Benjamin; NICOLET, Célia; NAVARRO, Christophe; CAYREFOURCQ, Ian; MÜLLER, Marcus; HADZIIOANNOU, Georges; ILIOPOULOS, Ilias; FLEURY, Guillaume; ZELSMANN, Marc (American Chemical Society (ACS), 2021)The directed self-assembly (DSA) of block copolymers (BCPs) is a powerful method for the manufacture of high-resolution features. Critical issues remain to be addressed for successful implementation of DSA, such as dewetting ...
-
Article dans une revue avec comité de lecture
LONGUETAUD, Fleur;
POT, Guillaume; MOTHE, Frédéric; BARTHELEMY, Alexis; DECELLE, Rémi;
DELCONTE, Florian; GE, Xihe; GUILLAUME, Grégoire; MANCINI, Théo; RAVOAJANAHARY, Tojo; BUTAUD, Jean-Claude;
COLLET, Robert; DEBLED-RENNESSON, Isabelle; MARCON, Bertrand; NGO, Phuc; ROUX, Benjamin;
VIGUIER, Joffrey (Springer Science and Business Media LLC, 2022-11-28)
The TreeTrace_Douglas database includes images and measurements at several stages of the processing of Douglas fir logs, from sawmill logyard to machine grading and destructive testing of boards, and is suitable for research ... -
Communication avec acteDENGUIR, Lamice;
FROMENTIN, Guillaume; MARTINS DO OUTEIRO, Jose Carlos; VIGNAL, Vincent; BESNARD, Rémy (ELSEVIER, 2014)
Superfinishing machining has a particular impact on cutting mechanics, surface integrity and local electrochemical behavior. In fact, material removal during this process induces geometrical, mechanical and micro-structural ... -
Article dans une revue avec comité de lecturePRAT, David;
FROMENTIN, Guillaume; POULACHON, Gerard; DUC, Emmanuel (American Society of Mechanical Engineers, 2016)
Five-axis milling with a ball-end cutter is commonly used to generate a good surface finish on complex parts, such as blades or impellers made of titanium alloy. The five-axis milling cutting process is not straight forward; ... -
Article dans une revue avec comité de lectureDENGUIR, Lamice; BESNARD, Aurélien;
FROMENTIN, Guillaume; POULACHON, Gerard; ZHU, Xiaowen (Inderscience, 2016)
One of the criteria mastering the choice of a cutting tool is its wear resistance. For coated inserts, prior to the coating process, edge preparation method choice will impact their performance. So, a classification based ...