Analysis and Modelling of the Contact Radius Effect on the Cutting Forces in Cylindrical and Face Turning of Ti6Al4V Titanium Alloy
Communication avec acte
Cutting forces are representative data to characterize machining operations.They have to be known to perform the part manufacturing. Therefore, cutting forces predictive models are useful and it is possible to optimize them by taking into account new parameters. Hence, this study deals with the geometrical modelling of tool-workpiece interaction and its influence on the cutting forces. The analysis focuses on convex contact radius between the machined part and the tool. Experiments are based on cylindrical and face turning of Ti6Al4V titanium alloy. The results highlight a significant influence of contact conditions on ploughing mechanisms, and consequently on the cutting forces intensity. This phenomenon is taken into account inthe suggested models, providing a better accuracy of cutting forces modelled.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
Mechanistic cutting force model including the stress state induced by the chip flow contribution for cylindrical turning on Ti6Al4V alloy with two different nose radii Communication avec acteForce modelling is a major research topic in machining. Several approaches are used to face with the different needs. Mechanistic models appear to be an easier and rapid way for computing cutting forces; nevertheless they ...
Investigations on the flank wear and modelling of the contact radius effect in turning of Ti6Al4V titanium alloy Communication avec acteBONO, Aurélie; COSTES, Jean-Philippe; FROMENTIN, Guillaume; KARAOUNI, Habib; DORLIN, Théo (Elsevier, 2016)Machining of difficult-to-cut materials like Ti6Al4V titanium alloy leads to significant flank wear on the cutting tool. In order to ensure the respect of final part specifications, flank wear has to be controlled. In ...
Generalised cutting force model including contact radius effect for turning operations on Ti6Al4V titanium alloy Article dans une revue avec comité de lectureCurrent constraints on aeronautical parts have led to the introduction of materials like titanium alloys as well as new part geometries featuring large dimensions and reduced thickness. Inappropriate cutting forces during ...
Characterization of the clamping and internal residual stresses effects on the distortion of Inconel 718 parts resulting from turning Communication avec acteRANCHIN, Lucas; VIPREY, Fabien; FROMENTIN, GUILLAUME; LORONG, Philippe; KARAOUNI, Habib; DORLIN, Théo; MONTEIRO, Eric (SSRN, 2023-12-11)The understanding of phenomena related to machining processesintheaerospace industry isstill the subject of study intheresearch community. This is due to the constrained geometric tolerances to ensure optimal performance ...
Communication avec acteCAMPOCASSO, Sébastien; COSTES, Jean-Philippe; FROMENTIN, Guillaume; BISSEY BRETON, Stéphanie; POULACHON, Gérard (Elsevier, 2013)In order to predict the characteristics of the machined part, such as geometry, surface roughness and fatigue or corrosion resistance, the cutting forces values should be known as precisely as possible. The edge discretisation ...