Generation and characterization of T40/A5754 interfaces with lasers
Article dans une revue avec comité de lecture
Laser-induced reactive wetting and brazing of T40 titanium with A5754 aluminum alloy with 1.5 mm thickness was carried out in lap-joint configuration, with or without the use of Al5Si filler wire. A 2.4 mm diameter laser spot was positioned on the aluminum side to provoke spreading and wetting of the lower titanium sheet, with relatively low scanning speeds (0.1 to 0.6 m/min). Process conditions did not play a very significant role on mechanical strengths, which were shown to reach 250-300 N/mm on a large range of laser power and scanning speeds. In all cases considered, the fracture during tensile testing occurred next to the TiAl3 interface, but in the aluminum fusion zone. In a second step, we have investigated the interfacial resistance with the LASAT bond strength tester, based upon the generation and propagation of laser-induced shock waves. This allowed us estimating a uniaxial bond strength of 0.68 GPa for the T40/A5754 interface under dynamic loading conditions.
Files in this item
Showing items related by title, author, creator and subject.
Article dans une revue avec comité de lecturePEYRE, Patrice; BERTHE, Laurent; POUZET, Sébastien; SALLAMAND, Pierre; TOMASHCHUK, Iryna; DAL, Morgan (Elsevier, 2014)Laser-induced reactive wetting and brazing of T40 titanium with A5754 aluminum alloy with 1.5 mm thickness was carried out in lap-joint conﬁguration, with or without the use of Al5Si ﬁller wire. A 2.4 mm diameter laser ...
Article dans une revue avec comité de lecturePEYRE, Patrice; POUZET, Sébastien; CASTELNAU, Olivier; DAL, Morgan (Laser Institute of America, 2017)The laser metal deposition (LMD) laser technique is a free-form metal deposition process, which allows generating near net-shape structures through the interaction of a powder stream and a laser beam. A simplified numerical ...
Physical mechanisms of conduction-to-keyhole transition in laser welding and additive manufacturing processes Article dans une revue avec comité de lectureThermo-hydrodynamic phenomena which take place during laser welding or additive manufacturing processes as laser powder bed fusion, have been investigated for years, but recent advances in X-ray images and in situ analysis ...
Absorptivity measurements during laser powder bed fusion of pure copper with a 1 kW cw green laser Article dans une revue avec comité de lectureNORDET, Guillaume; GORNY, Cyril; MAYI, Yaasin; DALIGAULT, Julien; DAL, Morgan; EFFERNELLI, A.; BLANCHET, E.; COSTE, Frédéric; PEYRE, Patrice (Elsevier Ltd, 2021-10)A 1 kW CW green laser source operating at 515 nm was used to investigate the absorptivity of pure copper powder beds and pure copper substrates. Various interaction regimes were considered, ranging from the solid and/or ...
Laser-induced plume investigated by finite element modelling and scaling of particle entrainment in laser powder bed fusion Article dans une revue avec comité de lectureMAYI, Yaasin; PEYRE, Patrice; BELLET, Michel; METTON, Charlotte; MORICONI, Clara; FABBRO, Rémy; DAL, Morgan (IOP Publishing, 2019)Although metal vaporisation has been observed in several laser processes such as drilling or welding, vapour plume expansion and its induced side effects are not fully understood. Especially, this phenomenon is garnering ...