Three-dimensional study for the relative positioning of mechanical elements in mechanisms constituted by parrallel joints with clearances
TypeArticles dans des revues avec comité de lecture
The great evolution of the data-processing tools during the last years allowed for the development of the computer aided design in the field of mechanical structures. Controlling the clearance in joints between parts, is one of the required objectives to provide accurate relative movements and to minimize geometrical errors. For that purpose, a new method of static study allowing for the computation of the equilibrium positions of various elements in spatial mechanisms constituted by parallel joints and subjected to mechanical loadings is proposed. The isostatic study takes into account the presence of the clearance in the mechanism joints. The method is based to the minimization of the potential energy by means of some algorithms of optimization. The results obtained show the effectiveness of the method.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Visualiser des documents liés par titre, auteur, créateur et sujet.
YOUNES, Wael; GIRAUD, Eliane; MONTASSAR, Fredj; DAL SANTO, Philippe; VAN DER VEEN, Sjoerd (2016)Creep forming of Al-Mg-Li alloy sheets is studied. An instrumented bulging machine is used to form a double curvature panel at a reduced scale. The deformation of the work-sheet is ensured by a 7475 aluminum alloy lost ...
YOUNES, Wael; GIRAUD, Eliane; DAL SANTO, Philippe (Trans Tech Publications, 2015)Anisotropic behavior at high temperature of an Aluminum-Lithium alloy was studied. Mechanical tests at a temperature of 350°C and a strain rate of 10-2 s-1 were carried out on samples taken at different angles with respect ...
Creep age forming of Al-Cu-Li alloy: Application to thick sheet forming of double curvature aircraft panel YOUNES, Wael; GIRAUD, Eliane; ZOUARI, Ahmed; DAL SANTO, Philippe; VAN DER VEEN, Sjoerd (2016)Creep-age-forming of a thick Al-Cu-Li sheet is studied. An industrial stamping press is used to form a double curvature panel at a reduced scale. This forming, which includes several relaxation steps, is modelled using ...
GILDEMYN, Eric; DAL SANTO, Philippe; ROBERT, Camille; POTIRON, Alain; SAIDANE, Delphine (Inderscience, 2010)This paper deals with a numerical approach for improving the mechanical properties of a safety belt anchor by optimizing its shape and the manufacturing process by using a multi-objective genetic algorithm (NSGA-2). This ...
Influence of the edge rounding process on the behaviour of blanked parts: numerical predictions with experimental correlation ACHOURI, Mohamed; GILDEMYN, Eric; GERMAIN, Guénaël; DAL SANTO, Philippe; POTIRON, Alain (Springer, 2014)Blanking of sheet metal is an important forming process in the automotive industry for the manufacture of mechanical components. The final component shape, obtained at the end of bending or deep-drawing processes, often ...