Numerical and Experimental Analysis of Cold Stretching of Aluminum Sheets Using an Instrumented Bench
Conférence invitée
Auteur
EL GUEDER, JawharGIRAUD, ElianeZHAO, NanDAL SANTO, PhilippeRésumé
Cold stretching of a thin 5154 aluminium sheet is studied. An instrumented bench is developed to analyse the forming of double curvature panels. A numerical tool using ABAQUS software is developed to predict the behaviour of thin sheets during the stretching process and also to estimate the residual mechanical field in the formed shapes. The bench is calibrated by comparing experiments and numerical results in terms of deformed shape, in-plane strain levels and thickness evolution.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture;
GERMAIN, Guénaël; ; (Taylor & Francis, 2014)
In this article, the development of an industrial prototype for manufacturing aeronautical fuselage panels is investigated. Deep drawing of large components such as aircraft fuselage panels is not an easy task in terms of ... -
Conférence invitée(2016)Creep forming of Al-Mg-Li alloy sheets is studied. An instrumented bulging machine is used to form a double curvature panel at a reduced scale. The deformation of the work-sheet is ensured by a 7475 aluminum alloy lost ...
-
Conférence invitée(2016)Creep-age-forming of a thick Al-Cu-Li sheet is studied. An industrial stamping press is used to form a double curvature panel at a reduced scale. This forming, which includes several relaxation steps, is modelled using ...
-
Communication avec acte(Trans Tech Publications, 2015)Anisotropic behavior at high temperature of an Aluminum-Lithium alloy was studied. Mechanical tests at a temperature of 350°C and a strain rate of 10-2 s-1 were carried out on samples taken at different angles with respect ...
-
Article dans une revue avec comité de lecture;MAREAU, Charles; AYED, Yessine; ; ; (Elsevier BV, 2020-12-17)
The present work focuses on the simulation of the heat treatment applied after printing of Ti-6Al-4V parts. The numerical tool aims at predicting the influence of heat treatment conditions (e.g. holding time, temperature) ...