Mechanical characterization of composite materials from curved structures
Mechanical behavior of composite laminates depends strongly on the manufacturing process. It is necessary to use representative samples of the material, and therefore of the process. In the case of filament winding, specimens are necessarily cylindrical or barrel extracted. In our case, a full-scale fiberglass composite structure is used for radial compression and axial cuts experimental performances. This work aims to estimate the elastic properties of composite laminate from a curved structure taking into account the manufacturing process. An inverse approach using an optimization process is adopted. By coupling a radial compression experiment with a 3D model obtained by Finite Element Method (FEM), a mechanical characterization becomes possible. Furthermore, these identifications combined with experiments of axial cuts enable the estimation of residual manufacturing stresses.
Files in this item
Showing items related by title, author, creator and subject.
Analytical and numerical study based on experimental investigation of different curved sandwich composites manufactured by filament winding process Article dans une revue avec comité de lectureHADDAD, Mohamed; CROZATIER, Mathilde; GUILLAUMAT, Laurent; TEREKHINA, Svetlana (SAGE Publications, 2018)Sandwich structures, due to their high stiffness versus lightness ratio, are used progressively in high performance products. In order to design these structures with the most appropriate dimensions and material combinations, ...
Influence of fibre orientation, moisture absorption and repairing performance on the low-velocity impact response of woven flax/Elium® thermoplastic bio-composites Article dans une revue avec comité de lectureMANAII, Racha; TEREKHINA, Svetlana; LAL, Chandreshah; SHAFIQ, Nasir; DURIATTI, Davy; GUILLAUMAT, Laurent (SAGE Publications, 2023-07-17)The importance of natural reinforced bio-composite materials with desirable properties such as high modulus-to-weight ratio, good impact resistance, and the ability to be easily repaired is crucial in the industry. A woven ...
Article dans une revue avec comité de lectureTARASOVA, Tatiana; EGOROV, Sergei; SKORNYAKOV, Innokentiy; HATTALI, Lamine; GUILLAUMAT, Laurent; TEREKHINA, Svetlana (Springer Science and Business Media LLC, 2021)The present paper aims to compare study the effect of porosity and degree of crystallinity on both quasi-static and fatigue behaviours of PA6 and PA12 specimens obtained by the fused filament fabrication (FFF). The glass ...
On the difference in material structure and fatigue properties of polyamide specimens produced by fused filament fabrication and selective laser sintering Article dans une revue avec comité de lectureTARASOVA, Tatiana; EGOROV, Sergei; HATTALI, Lamine; GUILLAUMAT, Laurent; TEREKHINA, Svetlana (Springer, 2020)The present paper describes the influence of both flexure quasi-static and fatigue loading on polyamide 12 (PA12) specimens fabricated by fused filament fabrication (FFF) and selective laser sintering (SLS) processes. ...
The effect of build orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer Article dans une revue avec comité de lectureTARASOVA, Tatiana; EGOROV, Sergei; SKORNYAKOV, Innokentiy; HATTALI, Lamine; GUILLAUMAT, Laurent; TEREKHINA, Svetlana (Elsevier BV, 2020)The present paper aims to study the effect of manufacturing build orientation on both flexural quasi-static and fatigue behaviours of semi-crystalline polyamide 6 obtained by Fused Filament Fabrication (FFF), by considering ...