Synthesis, microstructural and tribological characterization of calcined nano-bioceramic α- al2o3, sintered at different temperatures

FELLAH, Mamoun; AISSANI, Linda; LABAIZ, Mohamed; NOUVEAU, Corinne; IOST, Alain; MONTAGNE, Alex; ABDUL SAMAD, Mohamed; LAKMINE, F.

Communication sans acte

Auteur

FELLAH, Mamoun
106463 Mechanical Engineering Department

AISSANI, Linda

LABAIZ, Mohamed

NOUVEAU, Corinne
127742 Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]

IOST, Alain
211915 Mechanics surfaces and materials processing [MSMP]

MONTAGNE, Alex
211915 Mechanics surfaces and materials processing [MSMP]

ABDUL SAMAD, Mohamed

LAKMINE, F.

URI

http://hdl.handle.net/10985/11624

Date

2016

Résumé

The current research was undertaken to study the improvement of the tribological behavior of nanocrystalline bioceramic, α-alumina sample, produced by the calculations of gibbsite at different temperatures (300 to 1200°C), followed by uniaxial pressing, sintering and HIP treatment. The improved friction and wear resistance is attributed to the fine microstructure of the sample calcined at 1400 °C.

Fichier(s) constituant cette publication

Nom:: MSMP_INDENTATION_2016104_MONTA ...
Taille:: 589.3Ko
Format:: PDF

Voir/Ouvrir

Cette publication figure dans le(s) laboratoire(s) suivant(s)

Visualiser des documents liés par titre, auteur, créateur et sujet.

Thermal treatment effect on structural and mechanical properties of Cr–C coatings

Article dans une revue avec comité de lecture

FELLAH, Mamoun; AISSANI, Linda; ZAIRI, Amel; ABDUL SAMAD, Mohamed; NOUVEAU, Corinne; TOUHAMI, Mohamed Zine; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2018)

In the present study, the effect of thermal treatment on the mechanical and structural properties of chromium carbide coatings with different thicknesses is evaluated. The coatings were deposited by cathodic magnetron ...
Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys

Article dans une revue avec comité de lecture

FELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; IOST, Alain; MOHAMED ZINE, Touhami; MONTAGNE, Alex; NOUVEAU, Corinne (Elsevier, 2017)

This study aims to examine the effect of replacing vanadium by niobium and iron on the tribological behavior of hot-isostatic-pressed titanium alloy (Ti–6Al–4V) biomaterial, using a ball-on-disk-type oscillating tribometer, ...
Effect of Zr content on friction and wear behavior of Cr‐Zr‐N coating system

Article dans une revue avec comité de lecture

FELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; PURNAMA, Agung; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain; NOUVEAU, Corinne (Wiley, 2018)

Nanostructured Cr‐Zr‐N thin film with different Zr content (0 to 48.8 at.%) was deposited, using an RF magnetron‐sputtering technique. The structural evolution and morphological changes were performed. The tribological ...
Structural and mechanical properties of Cr–Zr–N coatings with different Zr content

Article dans une revue avec comité de lecture

AISSANI, Linda; FELLAH, Mamoun; NOUVEAU, Corinne; SAMAD, Mohamed Abdul; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2017)

Cr–Zr–N films have been synthesised using R.F reactive magnetron sputtering system on Si (100) wafer and XC100 steel substrate without heating. The structural, mechanical and friction coefficient evolution as a function ...
Characterisation of R.F. magnetron sputtered Cr-N, Cr-Zr-N and Zr-N coatings

Article dans une revue avec comité de lecture

FELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohamed; MECHACHETI, Said; TOUHAMI, Mohamed Zine; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2017)

Binary Cr-N, Zr-N and Cr-Zr-N films were synthesised using a R.F. reactive magnetron sputtering technique by co-sputtering Cr and Zr. The crystalline structure, morphology, mechanical and tribological properties of the ...