Friction and Wear Performance of Biomaterials Alloy AISI 316L and Ti-6Al-7Nb
Article dans une revue avec comité de lecture
JournalTrends in biomaterials & artificial organs
We became interested in this work to study the tribological behavior of two total hip replacements steel AISI 316L and titanium alloy Ti-6Al-7Nb tests performed in this work are essays with reciprocating movement. The tribological properties of wear by sliding (reciprocating) for the different samples were evaluated in the air on a tribometer with a tribotester software software following standards: ISO 7148, ASTM G99-95a, ASTM G 133-95, with a relative humidity of 33-38% at a temperature 24 to 27°C and a non-lubricated state. The ball 100C6 steel of 10 mm diameter, 835 HV hardness and Young’s modulus 310 GPa was chosen as the antagonist to prevent further chemical reactions. Three different speeds (1, 6 and 15 mms-1) and four normal forces (2, 4, 6 and 10 N) were applied, which allowed us to test twelve different conditions. The values of the friction coefficient obtained in this work are confirmed by the bibliographical results and meet the standards imposed by biomedical particularly at the joint surface state of hip prostheses.
Files in this item
Showing items related by title, author, creator and subject.
Synthesis, microstructural and tribological characterization of calcined nano-bioceramic α- al2o3, sintered at different temperatures Communication sans acteFELLAH, Mamoun; AISSANI, Linda; LABAIZ, Mohamed; NOUVEAU, Corinne; IOST, Alain; MONTAGNE, Alex; ABDUL SAMAD, Mohamed; LAKMINE, F. (2016)The current research was undertaken to study the improvement of the tribological behavior of nanocrystalline bioceramic, α-alumina sample, produced by the calculations of gibbsite at different temperatures (300 to 1200°C), ...
Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ZAIRI, Amel; ABDUL SAMAD, Mohamed; NOUVEAU, Corinne; TOUHAMI, Mohamed Zine; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2018)In the present study, the effect of thermal treatment on the mechanical and structural properties of chromium carbide coatings with different thicknesses is evaluated. The coatings were deposited by cathodic magnetron ...
Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; IOST, Alain; MOHAMED ZINE, Touhami; MONTAGNE, Alex; NOUVEAU, Corinne (Elsevier, 2017)This study aims to examine the effect of replacing vanadium by niobium and iron on the tribological behavior of hot-isostatic-pressed titanium alloy (Ti–6Al–4V) biomaterial, using a ball-on-disk-type oscillating tribometer, ...
Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohamed; MECHACHETI, Said; TOUHAMI, Mohamed Zine; MONTAGNE, Alex; IOST, Alain (Maney Publishing, 2017)Binary Cr-N, Zr-N and Cr-Zr-N films were synthesised using a R.F. reactive magnetron sputtering technique by co-sputtering Cr and Zr. The crystalline structure, morphology, mechanical and tribological properties of the ...
Article dans une revue avec comité de lectureFELLAH, Mamoun; AISSANI, Linda; ABDUL SAMAD, Mohammed; PURNAMA, Agung; DJEBAILI, Hamid; MONTAGNE, Alex; IOST, Alain; NOUVEAU, Corinne (Wiley, 2018)Nanostructured Cr‐Zr‐N thin film with different Zr content (0 to 48.8 at.%) was deposited, using an RF magnetron‐sputtering technique. The structural evolution and morphological changes were performed. The tribological ...