Evolution of polymer blend morphologies during extrusion in a flat die
Article dans une revue avec comité de lecture
Auteur
SOLLOGOUB, CyrilleGUINAULT, AlainRésumé
The control of blend morphologies during process is of prime importance in order to predict the final properties of polymer blends. A coextrusion technique combined with static mixers was developed in order to smartly blend polymeric melts and to optimize the blend morphologies during the flow in static mixers [1]. The aim of this paper is to study the evolution of those blend morphologies during extrusion in a flat die. The effect of the viscosity ratio and the interfacial tension are also investigated. The experimental observations are confronted with numerical simulation results.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecture(Wiley, 2016)A used-as-shipped biobased and biodegradable by-product of the palm oil refining increases polylactide (PLA) elongation at break up to 130% and allows film blowing without further additives. PLA blends are biodegradable ...
-
Article dans une revue avec comité de lecture(MDPI, 2021)The barrier performance and structural lightening of organic materials are increasingly desired and constitute a major challenge for manufacturers, particularly for transport and packaging. A promising technique which tends ...
-
Article dans une revue avec comité de lecture
ALKHUDER, Aboubaker; ; GERVAIS, Matthieu; ; IENNY, Patrick; ; SOLLOGOUB, Cyrille (Wiley, 2023-12)
Three layers film shaped by thermocompression of acrylonitrile butadiene styrene copolymer and polycarbonate have been analyzed in dynamic mechanical thermal analysis in tensile mode. They present two peaks as the film is ... -
Communication sans acte; ; ; ; ; ;SOLLOGOUB, Cyrille (2023-05)
Physical aging plays an important role in determining the long terms performance of polymers, especially PLA, whose Tg is close to ambient temperature. Considering long term performances, PLA/PHBV/PODC blends are the ...
-
Article dans une revue avec comité de lecture; ; ; ; ; ;REGNIER, Gilles (Elsevier, 2013)
A potential advantage of platelet-like nanofillers as nanocomposite reinforcements is the possibility of achieving two-dimensional stiffening through planar orientation of the platelets. The ability to achieve improved ...