Strain path's influence on the elastic behaviour of theTRIP 700 steel
Article dans une revue avec comité de lecture
Date
2013Journal
Materials Science and Engineering: ARésumé
This paper deals with the analysis of thestrain path's influence on the elastic behaviour of TRIP700 steel; it aims to validate the cyclic testing method to characterise inelastic behaviour of advanced high strength steels (AHSS). Different cyclic tests are done, where the strain path is changed from test to test. Large deformation strain gages are used to determine the inelastic behaviour of the specimens at macro-level. At a lower scale, stress measurements are carried out using the XRD technique during an in-situ tensile test: ferrite and austenite phases’stresses are measured before unloading and after loading again to study the strain path's influence. By means of this work it is confirmed that the elastic strain path has no influence on the unloading–loading of this TRIP steel. These results prove that conventional loading–unloading cyclic testing is a valid methodology for a detailed characterisation of the elastic modulus and reliable numerical modelling of springback.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureMALARD, Benoît; WRIGHT, Jonathan; PATOOR, Etienne; GEANDIER, Guillaume;
BERVEILLER, Sophie (Elsevier, 2011)
Two synchrotron diffraction techniques, three-dimensional X-ray diffraction and Laue microdiffraction, are applied to studying the deformation behaviour of individual grains embedded in a Cu74Al23Be3 superelastic shape ... -
Communication avec acteBOUSCAUD, Denis; PATOOR, Etienne; MORAWIEC, Adam;
BERVEILLER, Sophie;
PESCI, Raphaël (Trans Tech Publications, 2014)
The Kossel microdiffraction in a scanning electron microscope allows for local stress determination. This technique has been applied to monitor stress evolution within grains of austenite in the course of martensitic ... -
Communication avec acteGUIHEUX, Romain; BOUSCAUD, Denis; PATOOR, Etienne; PUYDT, Quentin;
BERVEILLER, Sophie;
KUBLER, Regis (12th International Conference on the Mechanical Behavior of Materials, 2015)
Shot peening process is commonly used in mechanical industries to increase life duration of mechanical and structural parts, as automotive gears for instance. It is based on the development of residual compressive stresses ... -
Article dans une revue avec comité de lectureTAUPIN, Vincent; BERBENNI, Stéphane; OUAHAB, Razane; BOUAZIZ, Olivier;
BERVEILLER, Sophie;
PESCI, Raphaël (Elsevier, 2013)
In situ tensile tests were performed at room temperature on a ferrite–cementite steel specifically designed for this study. The evolution of the average stress in ferrite during loading was analyzed by X-ray diffraction.Lattice ... -
Article dans une revue avec comité de lectureThis article deals with the application of several X-ray and neutron diffraction methods to investigate the mechanics of a stress induced martensitic transformation in Cu-based shape memory alloy polycrystals. It puts ...