UV to NIR photon conversion in Nd-doped rutile and anatase titanium dioxide films for silicon solar cell application
Article dans une revue avec comité de lecture
Auteur
Date
2012Journal
Optical MaterialsRésumé
Undoped and Nd-doped titanium dioxide anatase and rutile films have been grown by pulsed-laser deposition at 700 °C under 0.1 mbar O2. By selecting adequate substrates, TiO2 films doped with 1, 2 or 5 at.% Nd were grown and constituted with polycrystalline rutile, highly oriented (2 0 0) rutile film, or oriented (0 0 4) anatase. An UV to NIR photon conversion is evidenced in the films. Indeed, intense and well-resolved emission lines from Nd3+ have been observed upon excitation above the TiO2 bandgap at room temperature. The sensitised emission of Nd3+ is found to be much efficient in rutile than in anatase structure. Low temperature photoluminescence measurements lead to fine resolved peaks corresponding to the Nd3+ 4f transitions with different spectral characteristic according to the host matrix used. Photoluminescence dependence temperature evidences that the light emission from Nd3+ in anatase-based films is probably influenced by the presence of self-trapped excitons or by orbital interaction. Mechanisms of sensitisation host to Nd3+ are proposed for both matrixes. Finally, the Nd dopant concentration and the microstructure of TiO2 rutile films are found to affect the photoluminescence emission intensity. Rutile film (2 0 0) oriented is the most adapted host matrix to sensitise 1 at.% Nd3+ ions for an emission around 1064 nm making such Nd-doped layers interesting for photon conversion by down shifting process.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lecturePERRIÈRE, J; HEBERT, C; JEDRECY, N.; SEILER, Wilfrid; ZANELLATO, Olivier; PORTIER, X; PEREZ-CASERO, R; MILLON, E; NISTOR, M (American Institute of Physics, 2014)Pulsed-laser deposition is known as a well-suited method for growing thin films of oxide compounds presenting a wide range of functional properties. A limitation of this method for industrial process is the very anisotropic ...
-
Article dans une revue avec comité de lectureNISTOR, M; SEILER, Wilfrid; HEBERT, C; MATEI, E; PERRIÈRE, J (Elsevier, 2014)Indium oxide thin films were grown by pulsed electron beam deposition method at 500 °C on c-cut sapphire and (0 0 1) oriented LaAlO3 single crystal substrates in oxygen or argon gas. The effects of ambient gas and substrate ...
-
Article dans une revue avec comité de lectureSEILER, Wilfrid; SELMANE, M; ABDELOUHADI, K; PERRIÈRE, J (Elsevier, 2015)The nature of the crystalline phase present in gallium oxide films grown by pulsed-laser deposition on c-cut sapphire substrate has been studied. Amorphous, polycrystalline or epitaxial gallium oxide films can be obtained ...
-
Article dans une revue avec comité de lectureNISTOR, M; MILLON, E; CACHONCINLLE, C; SEILER, Wilfrid; JEDRECY, N.; HEBERT, C; PERRIERE, J. (IOP Publishing, 2015)Transparent Nd-doped ZnO films with thickness in the range of 70 to 250 nm were grown by pulsed-laser deposition (PLD) on c-cut sapphire substrates at various oxygen pressures and substrate temperatures. A wide range of ...
-
Article dans une revue avec comité de lectureSEILER, Wilfrid; NISTOR, M; PERRIÈRE, J; HEBER, C (2013)Indium oxide thin films were grown by the pulsed electron beam deposition method on c-cut sapphire substrates at 10−2 mbar oxygen pressure and temperature up to 500 1C. Such conditions lead to the formation of dense, smooth ...