Elevated temperature plasma nitriding and effects on electrochemical properties of steel
TypeArticles dans des revues avec comité de lecture
Surface modification of tool steel had been performed by utilizing plasma nitriding at elevated temperature by varying the exposure time. The nitrided steel had shown significantly enhanced corrosion resistance properties. X-ray diffraction (XRD) had revealed the presence of FexN (x = 2–3, 4) in the surface modified microstructure after nitriding. In an environment of NaCl potentiodynamic polarization and impedance (EIS) tests of steel with and without nitriding had been performed. Both these tests had shown the improved resistance to corrosion of the steel after nitriding.
Showing items related by title, author, creator and subject.
RAM MOHAN RAO, K.; NOUVEAU, Corinne; TRINADH, Kalimi (Elsevier BV, 2019)The present concerns surface modification of low alloy CrMoV steel by following the route of plasma nitriding for the improvement of hardness. Plasma nitriding was performed at a low temperature of 450 oC. The maximum ...
RAM MOHAN RAO, K.; NOUVEAU, Corinne; KHANNA, A.S.; ANEJA, Karanveer S.; TRINADH, Kalimi (Elsevier BV, 2020)In the present studies, efforts were made to improve corrosion resistance of 90CrMoV8 tool steel by following plasma nitriding. Plasma nitriding of this steel at 500 oC for6and 8 h significantly improved the corrosion ...
Electrochemical study on the corrosion resistance of surface modified Cr-Mo-V steel by elevated temperature plasma nitriding TRINADH, Kalimi; NOUVEAU, Corinne; KHANNA, Anand Sawroop; ANEJA, Karanveer S; RAO, K Ram Mohan (IOP Publishing, 2019)This study presents the effect of plasma nitriding on corrosion resistance of low alloy 90CrMoV8 steel. At a selected temperature of 500 °C, nitriding was performed by varying the exposure time. X-ray diffraction of nitrided ...
RAO, K. Ram Mohan; NOUVEAU, Corinne; TRINADH, Kalimi (Springer, 2020)This study presents the plasma nitriding of Cr–Mo–V tool steel to protect it from environmental degradation. The steel samples after metallographic polishing were nitrided in the glow discharge plasma of N2 and H2 gas ...
TRINADH, Kalimi; NOUVEAU, Corinne; RAO, K. Ram Mohan (Elsevier BV, 2021)In this study the effects on resistance to corrosion of a low alloy steel after plasma nitriding has been reported. Nitriding was performed at a low temperature of 450 °C and also at 520 °C for the same duration of 10 h ...